Re: knock sensor
Posted: Sun Jan 04, 2009 8:15 pmI see. How did you know about your manifold problem?
BMW E36 Forum
The Ultimate BMW E36 Forum . . . Everything you'll need to know about BMW E36 cars will be found here! Join the discussion
https://www.bmwe36blog.com/forum/
knock sensor
Page 2 of 2
Posted: Sun Jan 04, 2009 8:15 pmRe: knock sensor
Posted: Sun Jan 04, 2009 8:27 pmi get a loud ticking / gas escaping noise when the cars underload. its pretty much sounds like a hole in your exhaust pipe. from what i gather, the 318is's are notorious for this
Re: knock sensor
Posted: Mon Jan 05, 2009 7:31 amI think you should start by trying to fix this problem then. It will defintely help if not solve the problem completely.
Re: knock sensor
Posted: Tue Jan 06, 2009 12:19 amim going to get it loooked during the next week or so. going to have a play around with the diagnostics to see what else it may be. ill keep you updated
Re: knock sensor
Posted: Tue Jan 06, 2009 7:46 amgreat... good luck!
Re: knock sensor
Posted: Thu Jan 15, 2009 12:23 pmjust a update, had the lambda and cat changed..
the cars fine now
the cars fine now
Re: knock sensor
Posted: Wed Sep 23, 2009 7:52 pmhelou, carsoft error: 70 lambda probe or knock-sensor 1 (detonation-sensor)
lambda probe (dme1,7 x & 3.1)
knock-sensor 1 (detonation-sensor)
18 changeover valve, DISA butterfy
dme1.7.2 : m52 and m43 engine only
who is error? me engine M43 1,6i
lambda probe (dme1,7 x & 3.1)
knock-sensor 1 (detonation-sensor)
18 changeover valve, DISA butterfy
dme1.7.2 : m52 and m43 engine only
who is error? me engine M43 1,6i
Re: knock sensor
Posted: Tue Oct 06, 2009 5:27 pmHey guys i have a 325i 1992 and im having the same issue, i have done the following with no success:
Clean MAF
Clean ICV
Replaced couple broken vacuum hoses
Check for vaccum leaks
When i first bought the car i drove it for around 40 miles and it never did this (the idle problem) but i had a check engine light on and i took my car to the shop, well they did so much stuff to my car and they also replaced the oxygen sensor for an aftermarket one, the light is gone, the idle problems appear.
My car turns on fine, then at some point when is on idle it starts shaking and boucing from like 200 RPM's to like 1100 RPM's, it feels like its gonna stall then, suddently it fixes itself and it does it again randomly
Did you guys figure out what the problem was? Im a bit desperate here but im not going to give up, im looking to replace the aftermarket Oxygen sensor first, then knock sensors, and im also thinking on buying a brand new ICV, now i also have the idea of replacing the knock sensors and even ignition coils, i have made a list of possibilities and im going to attack them all i guess.
If someone fix the problem please let me know what did you do.
I appreciate your help.
Clean MAF
Clean ICV
Replaced couple broken vacuum hoses
Check for vaccum leaks
When i first bought the car i drove it for around 40 miles and it never did this (the idle problem) but i had a check engine light on and i took my car to the shop, well they did so much stuff to my car and they also replaced the oxygen sensor for an aftermarket one, the light is gone, the idle problems appear.
My car turns on fine, then at some point when is on idle it starts shaking and boucing from like 200 RPM's to like 1100 RPM's, it feels like its gonna stall then, suddently it fixes itself and it does it again randomly
Did you guys figure out what the problem was? Im a bit desperate here but im not going to give up, im looking to replace the aftermarket Oxygen sensor first, then knock sensors, and im also thinking on buying a brand new ICV, now i also have the idea of replacing the knock sensors and even ignition coils, i have made a list of possibilities and im going to attack them all i guess.
If someone fix the problem please let me know what did you do.
I appreciate your help.