BMW E36 Blog

Turning Your BMW Lights On Automatically At Night . . . Implemented

24th February 2008

Turning Your BMW Lights On Automatically At Night . . . Implemented

posted in Do It Yourself, Electrical, Technical Info, Tips & Tricks |


post rating
PoorOkayGoodGreatExcellent (1 votes, average: 5.00 out of 5)
Loading...

 

This is the third post in the series of how to create a control device to turn your BMW lights on automatically when it gets dark. In the first post Turning Your BMW Lights On Automatically At Night, we’ve seen how it is possible to control a light using an electronic circuit that is sensitive to light. In the second post, Turning Your BMW Lights On Automatically At Night . . . Circuit Diagram, I presented an electronic diagram that can be used as the light controller inside the car. Of course, everything I said until that post was a theory that I’m almost sure that everyone of you thought it’s impossible or at least hard to implement. At least that explains why I didn’t get any comments on that article which I’m pretty sure it’s very interesting to everyone who drives a BMW E36.

Anyway, I decided to go one step further and try to implement my theory and my electronic circuit to see if it’s going to work or not. So, I brought everything that I mentioned in the second post + breadboard to help me implement the circuit and test it to see how efficient it is going to be. After I put the electronic circuit together, I discovered that the relay is not working :p . So, I had to pull one of the car relays to use it in my test. The circuit on the breadboard looked like this (very simply):

After that, I went to the car and connected the wires to my battery and started manipulating the variable resistor until I heard the relay ticking. When I heard the tick I moved the variable resistor back a little bit until I heard the relay tick again (this time it’s disconnecting). Now everything is set up correctly. I tried to cover the CDS (Cadmium Sulfide Cell) with my hand to make it "think" it’s dark and the relay ticked. Yay! it meant that the circuit is really working and all I had to do right now is to connect the car headlights to the relay and we’re done.

The circuit that I used is this:

When I tried to connect the headlights, I left the circuit on and after I connected the headlights to the relay, I tried again and opss. It’s not working anymore. Damn it!

It turned out that my circuit which was missing the 1KΩ resistor that is connected to the transistor base is not going to make the transistor last long. This problem is happening because the transistor base is not supposed to receive high current which I gladly sent to it. To solve this problem, I introduced the resistor to protect the transistor base and replaced the old transistor with a new one. Try again … it worked for a minute and then my radio stopped working 😆

Its seems that my battery went dead because I left the lights on for some time. beginner’s mistake huh 😀

So, I removed the circuit and tried to turn my car on but it didn’t, after that I had to abort the mission and solve the car’s problem before continuing the experiment. That’s what happened last night. I hope I will be able to give you an update on this as soon as I make this circuit perfect.

What I learned until now is that this circuit is going to work on my car, but I need more time to make it work perfectly. In case you didn’t notice, I introduced a capacitor to the circuit as well which is supposed to make the headlights work for a little bit longer when the CDS is exposed to light after dark. This is supposed to avoid light flickering inside your car.

I hope you enjoyed today’s post. Until my next adventure with this project, please stay tuned to get more updates on it.

BMW E36 Blog: The ultimate E36 information source.

 

Join the BMW E36 Forum

BMW E36 Forum
 

Want to receive exciting tips & information about BMW E36 cars? Enter your Email:-


 

 

Having A Problem With Your Bimmer?

Use JustAnswer Service to get help from a BMW expert now! You can also read my review of this service here.

There are currently 2 responses to “Turning Your BMW Lights On Automatically At Night . . . Implemented”

Why not let us know what you think by adding your own comment! Your opinion is as valid as anyone elses, so come on... let us know what you think.

  1. 1 On February 25th, 2008, Zoltan said:

    Hi Tony,

    Man, you are just amazing. This is really funny and entertaining! I mean I think I would hardly be able to do things like this, because first of all I don’t know a lot about my e36 (just have it for 6 months, and this is my first car), and for second you should be some kind of electrician, which I’m not. Therefore there are many things that you know well but I (and many other of the 192 subscribers) don’t. So that all makes your post and the blog really interesting. Thanks for that, and keep going. I’m curious, even if I won’t make these changes (yet).
    Zoltan

  2. 2 On February 26th, 2008, Tony Sticks said:

    Thank you for the reply Zoltan. I know this subject is a little bit hard if you don’t know much about electronics, but at the end of the day, you can simply take the circuit diagram and give it to some electrician and ask him to implement it for you in exchange for as little money as $10.

    I think this can be easily done by an electrician.