lowering

by **tboss-316i** on Wed Nov 19, 2008 11:26 am

can i lower my e36 by 40mm without changing my shockers? cheers

by **tonysticks** on Wed Nov 19, 2008 3:34 pm

Yes, i think you can do that, but your shocks will not last for long. I suggest that you replace the springs & shocks at the same time and from the same source. I think this is better if you're intending to do the job right.

by **tboss-316i** on Wed Nov 19, 2008 3:53 pm

cheers mate thanx for your advise

by **tonysticks** on Wed Nov 19, 2008 4:04 pm

no problem

by **sach767** on Sun Nov 23, 2008 7:36 am

hi just curious..

most aftermarket springs forthe E36 will drop ur car between 30-35mm... which springs are you on wt a 40mm drop - on stock shocks i assume??

adjustables should give you the desired drop..ie, Bilstein PSS9... good luck!!

thx..

by **tboss-316i** on Sun Nov 23, 2008 4:43 pm

iv been told apex type 3B,C will drop 40mm without changing shocks have a look on autotintdesign.com they sell them there.happy moddin

by **sach767** on Mon Nov 24, 2008 3:02 am

thx mate...

by **dazza 318i** on Sun Jan 18, 2009 5:31 pm

wot is the best setupp for lowering 318is as the kits from gsf say not 318is
dont want really hard ride just a little more stable
cheers dazza

lowering

lowering

Re: lowering

Re: lowering

Re: lowering

Re: lowering

Re: lowering

Re: lowering

Re: lowering

Who is online