BMW E36 Blog

Fixing BMW E36 Door Panels . . . Videos!

24th December 2007

Fixing BMW E36 Door Panels . . . Videos!

 

Hello, First of all, I just want to apologize for not being able to post on schedule in the last 4 or 5 days. I’ve been very busy with my relatives and couldn’t find an hour or two to even do a quick post. So, I hope that you have missed me (or missed my posts at least 😆 ). For today’s post, I have found these 3 videos which precisely show how you can remove your BMW E36 door panels, fix them and re-install them again. After you’re done with these videos, please pay attention to the sound of the door while closing. It’s a magnificent sound. I hope you find these videos useful. In case you hate videos (well, I don’t know why you should be), but you can find another DIY that I have posted before about fixing your door panels. You can find it here Fixing BMW E36 door panel!.

Check it out!


 

I hope you liked the video . . . if not, come on let’s see your videos 😉

BMW E36 Blog: The ultimate BMW BMW E36 information source.

Want to receive exciting tips & information about BMW E36 cars? Enter your Email:-


 

 

posted in Do It Yourself, Interior, Technical Info, Tips & Tricks | 12 Comments

28th March 2007

Fixing BMW E36 door panel!

Hi Friends,

 

The door panels in BMW E36 and especially the coupe type is a very common problem that every owner will sooner or later face. As you might have guessed I’m facing this problem right now with my babe :-(. So it’s time to fix it, but I realized that I don’t have any knowledge about the issue, so how am I supposed to fix it. Well, as usual, I will go out and dig to find some people who faced this problem before me and successfully solved it. I’ve found this post which describes the process in detail and I thought I should share it with you guys. Maybe you’d like to do the same to your cars.

 

Note: don’t forget to buy some clips before starting the surgery, otherwise you will fail to do the job successfully. Good luck!

 

 

Disclaimer: Use this procedure at your own risk!! I’m not responsible for your mistakes man! 😀

 

This is a simple way to fix you sagging or lose door card. I spent about 10 min doing everything, the only catch is that you will need to let the
adhesive cure or dry.

 

Removal: The panel is fastened by clips and screws, there are 2 screws tucked behind the handle on the arm rest, simply pop the covers off and unscrew them, after that just pull the door card off and unplug the speakers, the speaker wires pull right out, don’t be to
aggressive though as you may damage them.

 

Things you’ll need once the door panel is off:

Pliers, and RTV silicone.

 

This is what it looked like before I took it off the car

 

 

This is what the repair did

 

 

Once I examined the door I found what the cause was. There is a plastic molding holding the door clips that was glued to the door card and had separated itself due to many opening and closings.

 

 

Some of the clips were broken as well. I recommend purchasing new ones from the dealer, don’t be a cheap wad. You should have these clips before the repair so that you can do everything at once. To remove the clips simply wist and pull them with pliers, they are notched and are designed to be done that way.

 

 

 

Remove the clips before you decide to apply the adhesive as this may cause some issues later on in the repair. To put new clips in, just twist them in with your fingers, it doesn’t take much effort.

 

 

Next you simply apply the adhesive thoroughly. Cleaning shouldn’t really be an issue, but if you decide to clean the area, use a mild soap and warm water. Push down on the plastic to spread the silicone around, you don’t need to smooth it, let the plastic do the work for you, plus you don’t get dirty.

 

 

That’s pretty much it for the repair, the next thing you’ll want to do is apply pressure. I chose to use a piece of cylinder poly and laid my amp on it. You’ll want to have adequate pressure to ensure a tight bond. When you add the weight, have the door panel somewhere that will be out of ways harm. I chose the coffee table….

 

 

 

Let the RTV dry before you mount it back on the car. I let mine sit over night just to be safe. Simply reverse the removal process to re-attach the door panel…and your finished

 

Hope this helps, it’s super easy and cheap, it’s not the most interesting thing in the world but I needed it fixed so I’m sure someone else does to. If you guys think I left something out then let me know but I think I covered everything.

 

Are you looking for more do it yourself procedures (DIY) ? I recommend the Bentley BMW 3 series service manual for you. I got it and I think it’s a gold mine for us -BMW E36 Owners-. If you didn’t grab your copy yet, get it right now! I’m sure you’ll find this book worth every penny you’ve paid for. Get the Bentley BMW 3 series service manual

 

Wait for more from . . . BMW E36 Blog

 

Best regards,

Tony Sticks.

Want to receive exciting tips & information about BMW E36 cars? Enter your Email:-


 

 

posted in Do It Yourself, Interior, Technical Info, Tips & Tricks | 14 Comments